It is the cement based, including chemical additives with special quality, high performance and water resistant adhesion mortar cement.

In indoor places, in horizontal and vertical, in outdoor places and for the adhesion of coating materials like tiles, ceramics, faience, tiles, square tiles etc. in outdoor places on the horizontal surfaces.

The consumption ratio is about 4-5 kg / m² according to the sizes of the used coating materials and smoothness of application surfaces.

No foreign substances must be added to the ERKÄ°M SY tile adhesion mortar in the original bags.

The temperature of the application environment must be between +5 ^oC and +35 ^oC, no application must be performed under severe wind, sun and rain.

Scaling period of the mortar must be followed, if the mortar applied on the surface with toothed trowel has been waited for more than 20 minutes it must be toothed with the same trowel.

All working equipment must be washed with water without drying.

Since the mortar is cement based the places where it gets in touch with the skin must be washed with plenty of water.

Colour : Grey

Type : Powder

Use time : Max 3 hours

Skin formation : 20 minutes

Filling :After 24 hours

At the beginning :> 0.9 N/mm²

After immersing in water : >0.5 N/mm²

After heating up : >0.5N/mm²

After freezing-melting : >0.5N/mm²

Open time, 20 minutes : >0.5N/mm²

In bags of 25 kg